MagDynSignage

MagDyn Signage / Time, temperature and data boards

Information · Live value boards

Boards that show the number everyone needs to see

Time and temperature displays for landmarks and showrooms, and live process, production and status boards for plants and control rooms. Built and programmed in our own shop in Chennai.

Discuss a display

What these boards show

  • Time and temperatureOutdoor boards for landmarks, showrooms and forecourts, read at a glance from a distance.
  • Live plant dataProcess values taken from your system and shown where the work happens.
  • Production and status boardsLine state and counts made visible to the whole floor at once.
  • Control room displaysBoards that mirror the values the operators are already watching.
  • Time and temperature
  • Plant data
  • Status boards
  • Control rooms
MAGDYN 10:45 28°C Characters sized for the reading distance, not the pixel count
A landmark board earns its place by being legible from a moving car. Character height follows the reading distance; brightness follows the light it sits in.

Status boards on the shop floor

A status board, often called an andon board, puts the state of a line where everyone can see it. The value is not the display. It is that a stoppage stops being something reported upward later and becomes something visible immediately.

The display is the straightforward part of that job. The real work is getting the data out of your system reliably and continuously, which is why we build the board and write the software that feeds it rather than handing you a screen and a protocol document.

LINESTATECOUNTTARGET Press 1Press 2AssemblyPacking Running Stopped Starved Running 1,2846129031,190 1,3001,3001,3001,300
A status board stops a problem being something reported upward later. Two LED colours do the whole job: amber for running, red for stopped, unlit for starved.

Designed to be read, not admired

An information board has one job: to be legible, from the distance it is actually read, in the light it actually sits in. A forecourt board read from a moving car and a control room board read from eight metres are different problems, and neither is solved by resolution.

We size the characters for the viewing distance, specify brightness for the position, and build the enclosure for the environment, sealed for outdoor use where it needs to be.

Tell us the mounting position, the reading distance and what value the board has to show. Those three facts determine the specification.

Common questions

What is a time and temperature display board?

It is an outdoor board that shows the current time and ambient temperature, usually mounted on a landmark building, showroom or forecourt. It is read at a glance from a distance, so legibility and brightness matter more than resolution.

Can a board show live data from our plant?

Yes. Boards can display live process values, production counts or status taken from your system, so a figure on the shop floor matches the figure in the control room.

What is a status or andon board?

It is a large display on the shop floor showing the current state of a line or machine so that a problem is visible to everyone at once. The display is the simple part; getting the data out of your system reliably is the real work.

Are these boards made for outdoor use?

Both. Time and temperature boards are built into sealed outdoor enclosures formed in our own shop, while plant and status boards are usually indoor units specified for the environment they sit in.

Contact

Tell us where it goes. We will size it.

Email

info@magdyn.com

Phone

+91 44 2496 0663
+91 99620 96001

Factory and office

Magneto Dynamics Private Limited
No. 7, 8, 9 Venkateswara Nagar Main Road
Perungudi, Chennai 600096, India